LED Indicator | ||
Connection indicator | Description | Troubleshooting |
Flashing blue | Turn on to initialize | / |
Blue | Normal operation | / |
Status indicator | Description | Troubleshooting |
Flashing red (every two seconds) | Paper shortage or low-quality paper; Wrong paper size | Make sure the labels are loaded correctly and use the right quality labels; Run automatic label identification. |
Flashing red (2 times per second) | The top cover is not fully closed. | Check if the top cover is completely closed. |
Flashing red and green alternately | The printer head is overheated. | Wait for it to cool down. |
Green | Normal operation | / |
Feed Button | |
Desired Action | Execution |
Skip a label | Press the feed button once and release it. |
Run the automatic label identification (for labels with gaps) | Press the feed button and hold on until you hear one beep. To run the Intelligent Label Study process, the printer will feed two pieces of blank pages out. (The first time you load labels and every time you change to new size labels, operate these steps.) |
Print test page | Press the feed button and hold on until you hear two beeps and release it. |
Restore factory setting | Press the button and hold on, first you will hear one beep noise, two beep noises, then three beep noises, finally consecutive five beep noises. (It is not necessary to do this if the printer works normally.) |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article